Konica Minolta bizhub C353 Service Manual page 284

Field Service Ver. 3.0 Jan. 2008
<Media Adjustment>
1
Functions • Adjust the 2nd image transfer output (ATVC) on the 1st page and the 2nd page for
each paper type.
• This function is provided to open [Transfer Output Fine Adjustment] → [2nd Transfer
Adjust] of Service Mode up to administrator and the fine-adjusted value is reflected in
the Service Mode setting.
Use • To use when the transfer failure at the trailing edge occurs.
Adjustment
Specification
Adjustment To increase the ATVC value (in the direction of a foggier image):
Instructions increase the setting value in + direction.
To decrease the ATVC value (in the direction of a less foggy image):
increase the setting value in - direction.
Setting/ 1. Call the Administrator Setting to the screen.
2. Touch these keys in this order: [Expert Adjustment] → [Printer Adjustment] → [Media
Procedure
Adjustment].
3. Select the side of the image (Front side or Back side), on which the transfer failure at
the trailing edge occurs.
NOTE
• Only 1st side can be selected for Envelope and Transparency.
4. Select the paper type with the transfer failure at the trailing edge.
5. Enter the new setting from the [+] / [-].
6. Touch [OK] to validate the adjustment value.
7. Check the copy image for any image problem.
(3) Finisher Adjustment
See P.28 of the SD-505 service manual.
See P.62 of the FS-519/PK-515/OT-602 service manual.
1
See P.37 of the FS-609/PK-501 service manual.
"0" (-8 to +7)
8. Utility Mode
239
1