Konica Minolta bizhub C353 Service Manual page 278

Field Service Ver. 3.0 Jan. 2008
<Changing Zoom Ratio>
Functions
• To set whether to allow or restrict the change on the registered magnification.
Use
Setting/ • The default setting is Allow.
Procedure
<Change the "From" Address>
Functions
• To set whether or not to prohibit the registered from address to be changed.
Use
Setting/ • The default setting is Allow.
Procedure
<Change Registered Overlay>
Functions
• Selects allow or restrict for the change of registered overlay.
Use
Setting/ • The default setting is Allow.
Procedure
(4) Restrict Operation
<Restrict Broadcasting>
Functions
• To set whether or not to prohibit sending the fax to more than one address.
Use
Setting/ • The default setting is OFF.
Procedure
G. Expert Adjustment
• It will not be displayed when the following setting shows that vendor 2 is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the Key Counter is mounted or when the following setting
shows that switch No.33 is set to [01] at HEX assignment.
[Service Mode] → [System 2] → [Software Switch Setting])
(1) AE Level Adjustment
Functions • To set the default setting for AE (Auto Exposure) the larger the value becomes the
more emphasized the background will be.
Use To make the background level foggier: Increase the setting value
To make the background level less foggy: Decrease the setting value
Setting/ • The default setting is 2.
Procedure
"Allow"
"Allow"
"Allow"
ON
"2" (0 to 4)
8. Utility Mode
Restrict
Restrict
Restrict
"OFF"
233