Konica Minolta bizhub C353 Service Manual page 250

Field Service Ver. 3.0 Jan. 2008
(6) WebDAV
Functions
• To register/change WebDAV address to send scanned data.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed address to check, edit or delete the setting.
(7) IP Address Fax
• Setting will be available only when [IP Address FAX] is set to "ON" in the following set-
tings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
Functions
• To register/change the IP address fax destination when transmitting the IP address
fax data.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed address to check, change or delete the setting.
(8) Internet Fax
• Setting will be available only when [Internet FAX] is set to "ON" in the following settings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
Functions
• To register/change the Internet fax address when transmitting the internet fax data.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed address to check, change or delete the setting.
B. Group
Functions
• To register/change a group to send scanned data/fax data simultaneously.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed group to check, edit or delete them.
• At least one address must be registered for registering a new group.
C. E-mail Settings
• It will not be displayed when the following setting shows that the management device 2 is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) E-mail Subject
Functions
• To register the e-mail subject when transmitting the scanned data.
Use
Setting/ • A new address can be registered by touching [New].
Procedure • Select any displayed address to detail check, edit or delete the setting.
• The subject can be set as default by selecting the subject displayed on the screen
and pressing [Set as Default].
8. Utility Mode
205