Konica Minolta bizhub C353 Service Manual page 311

8. Utility Mode
F. External Server Settings
Functions • Registers and sets an external server that is used for user authentication.
Use • To make user authentication by external server authentication.
Setting/ 1. Select one from No. 1 to No. 20 and touch [NEW].
Procedure 2. Set [Server Name] and [Server Type].
3. To change settings, select an external server to be edited and touch [Edit].
<Server Type>
Active Directory
NOTE
• Neither [NTLM v1] nor [NTLM v2] appear when OFF is selected in the following
setting.
[Administrator Settings] → [Network Settings] → [SMB Settings] → [User
Authentication (NTLM)]
• [NDS] does not appear when OFF is selected in the following setting.
[Administrator Settings] → [Network Settings] → [NetWare Settings] → [User
Authentication Setting (NDS)]
G. Limiting Access to Destinations
(1) Create Group
Functions
• Registers and edits groups of destinations for limiting access.
Use
Setting/ 1. Select a group and touch [Edit].
Procedure 2. Enter [Group Name].
3. Set the Access Allowed Level and touch [OK].
(2) Apply Levels/Groups to Destinations
Functions
• Sets Apply Level and Apply Group for individual destinations.
Use
Setting/ 1. Select one from Address Book, Group, and Program.
Procedure 2. Select a registered address. Touch [Apply Group] and [Apply Level] independently to
make each settings.
(3) Apply Levels/Groups to Users
Functions
• Sets Apply Level or Apply Group for individual users.
Use
Setting/ 1. Select a registered user. Touch [Apply Group] and [Apply Level] independently to
Procedure make each settings.
266
Field Service Ver. 3.0 Jan. 2008
NTLM v1 NTLM v2 NDS LDAP