Konica Minolta bizhub C353 Service Manual page 377

8. Utility Mode
I. Image Log Transfer Settings
• It will be displayed when the following setting shows that switch No.63 is set to [01] at
HEX assignment.
[Service Mode] → [System 2] → [Software Switch Setting]
Functions • Specifies whether to transfer the input or output image data to the server using when-
2
Use • Use this settings to keep logs of input and output image data for security purpose.
Setting/ • The each default setting is No.
Procedure
• When selecting [Yes], make the settings of the FTP server where data are trans-
• Set the following item.
<WebDAV Server setting>
2
• Host Name, File Path, User Name, Password, Port Number, Proxy, SSL Setting.
<FTP Server setting>
• Host Name, File Path, User Name, Password, Port Number, PASV, and Proxy.
NOTE
• When [Yes] is selected, a person who is registered as User cannot use Scan To
J. Driver Password Encryption Setting
Functions • To set whether to use the factory default encryption word or user-defined one as a
Use
NOTE
• When selecting [User-Defined], set an encryption key being consisted of the
• The use of OpenAPI allows an encryption key to be obtained from the main
Setting/ • The default setting is Use Factory Default.
Procedure
332
2
ever MFP inputs or outputs image data.
Makes the settings of the WebDAV server or the FTP server where image data are
transferred.
Yes
ferred.
FTP/WebDAV function.
common key that encrypts a password used for a print job.
User-Defined : Sets an encryption word. Enter an encryption word of 20 let-
ters.
Use Factory Default : Uses the factory default encryption word (Undisclosed pre-
defined encryption key).
same letters in the printer driver. If the encryption word set in the main body
differs from the encryption key set in the printer driver, different encrypted
passwords are created and printing cannot be made.
body.
User-Defined
Field Service Ver. 3.0 Jan. 2008
"No"
"Use Factory Default"