Konica Minolta bizhub C353 Service Manual page 685

3. Firmware upgrade
7. Once the "mkcf.bat" is executed, data writing into the compact flash is started.
8. Upon completion of writing, CHECKSUM is executed. If CHECKSUM value is precisely
matched, "VERIFY OK" appears.
9. Remove the compact flash from PC.
NOTE
• When removing the compact flash, be sure to check if data is written as normal
and then remove it according to the precise removing method.
6
Field Service Ver. 3.0 Jan. 2008
A02EF2E531DA
4038F2E565DB