Konica Minolta bizhub C353 Service Manual page 360

Field Service Ver. 3.0 Jan. 2008
(15) Print E-mail Message Body
• Settings will be available only when [Internet Fax] is set to "ON" in the following settings.
[Administrator Settings] → [Network Setting] → [Network Fax Setting] → [Network Fax
Function Settings]
Functions • To set whether to print mail text received normally as the report when internet fax
function is being used.
Use • To print the received mail text when printing the received image data.
Setting/ • The default setting is ON.
Procedure
H. Job Settings List
• It will not be displayed when the following setting shows that Vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the Key counter is mounted or when the following setting shows
that switch No.33 is set to [01] at HEX assignment.
[Service Mode] → [System 2] → [Software Switch Setting])
Functions
• The set value list of the fax set up into this machine can be printed.
Use
1. Touch [Administrator Settings] → [Fax Setting] → [Job Settings List].
Setting/
Procedure 2. Select the feed tray.
3. Select the simplex or duplex print, and touch the Start key.
I. Multi Lines Settings
• It will be displayed only when the optional fax multi line (ML-501) is mounted.
(1) Line Parameter Setting
<Dialing Method>
Functions • To set the dial method for the expanded line.
Use • To use when changing the dial method for the expanded line.
Setting/ • The default setting is PB.
Procedure
NOTE
• The displays are different depending on the country.
<Number of Rx Call Rings>
Functions • To set the number of RX call rings for the expanded line.
Use • To change the number of artificial ringback tones with expanded line when receiving
calls until it starts receiving operation.
Setting/ • The default setting is 2 X.
Procedure
"ON"
"PB"
"2 X" (0 to 15)
8. Utility Mode
OFF
10 pps
315