Default Scan/Fax Settings - Konica Minolta bizhub C353 Service Manual

8. Utility Mode
B. Black Compression Level
Functions • To set the monochrome compression method for scanning in the monochrome mode
while in scan/fax mode.
Use • To be used when changing the monochrome mode while in scanner mode.
Setting/ • The default setting is MMR.
Procedure
C. TWAIN Lock Time
• It will not be displayed when the optional image controller IC-409 is mounted.
Functions
• To set the period of time for unlocking the operation panel while in TWAIN scanning.
Use
Setting/ • The default setting is 120 sec.
Procedure
8.5.5

Default Scan/Fax Settings

• This menu is unavailable if user authentication is not made while either of authentication
devices is set to Set in the [Service Mode] → [Billing Setting] → [Management Function
Choice].
• This menu is not available when the key counter is set or when a warning appears to
inform that the vendor's main power switch needs to be checked or coins (a card) are not
inserted under the condition where the vendor is set to Set in the [Service Mode] → [Bill-
ing Setting] → [Management Function Choice].
Functions • To make default settings for the fax/scan mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user's need.
Setting/ <Current Setting>
Procedure • The settings made on the control panel before entering the setting menu screens are
registered as the default settings of fax/scan functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the
default settings of fax/scan functions.
220
MH
"120 sec." (30 to 300 sec.)
Field Service Ver. 3.0 Jan. 2008
"MMR"