Konica Minolta bizhub C353 Service Manual page 704

Field Service Ver. 3.0 Jan. 2008
C. Forwarding access setting
• To make the access setting for the program server which stores the firmware data.
1. Select [Internet ISW] which is available from [Service Mode].
2. Touch [Forwarding Access Setting].
3. Select [User ID], and enter the user ID which is necessary for connecting to the pro-
gram server on the on-screen keyboard, and touch [END].
4. Select [Password], and enter the password which is necessary for connecting to the
program server on the on-screen keyboard, and touch [END].
5. Select [URL], and enter the directory which stores the program server address and the
firmware on the on-screen keyboard by URL method, and touch [END].
NOTE
• Enter the URL which matches to the protocol to be used.
When connecting to http
When connecting to ftp
6. Select [File Name], and enter the file name of the firmware data to be downloaded on
the on-screen keyboard, and touch [END].
7. Touch [END] to finish setting.
http://(host name or IP address)/directory name
or https://(host name or IP address)/directory name
ftp://(host name or IP address)/directory name
3. Firmware upgrade
A00JF2E584DA
25