Konica Minolta bizhub C353 Service Manual page 297

8. Utility Mode
(3) Job Reset
<When Account is changed>
• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
Functions • Selects whether to reset (initialize) a machine when the key counter is unplugged, a
magnetic card is pulled out, or user authentication/account track is set.
Use • To select not to reset to the default settings even when the accounts are changed
through the use of a data management device.
Setting/ • The default setting is Reset.
Procedure
<When Original is set on ADF>
Functions • Select whether to reset the function when originals are placed on the ADF.
Use • Reset the function when originals are set on the ADF.
Setting/ • The default setting is Do Not Reset.
Procedure
<Next Job: Staple Setting>
Functions
• To set whether to cancel the staple setting when the staple setting job started and the
next job setting has become available.
Use
Setting/ • The default setting is OFF.
Procedure
<Next Job: Original Set/Bind Direction>
Functions
• To set whether to cancel the original set/bind direction when the job (which original
set/bind direction is set) started and the next job setting has become available.
Use
Setting/ • The default setting is OFF.
Procedure
<Next Job: Reset Data After Job>
Functions • To set whether to cancel the setting for scanning or transmitting fax when the scan-
ning is finished or fax is transmitted, making the next job setting available.
Use
(The address will be cleared even when [OFF] is selected.)
Setting/ • The default setting is ON.
Procedure
252
"Reset"
Reset
ON
ON
"ON"
Field Service Ver. 3.0 Jan. 2008
Do Not Reset
"Do Not Reset"
"OFF"
"OFF"
OFF