Field Service Ver. 3.0 Jan. 2008
[2]
(*)
[2]
[1]
[2]
[1]
(*)
[2]
[1]
[2]
A01GF2C585DA
[2]
[2]
[2]
A01GF2C586DA
[1]
[1]
A01GF2C587DA
7. Mount the stand table upper unit
(front) [1] which was removed in step
3, and tighten five screws [2].
NOTE
• Use care since the lengths of the
screws (*) shown on the illustration
are different from other screws.
8. Mount the stand table upper unit
(rear) [1] which was removed in step
2, and tighten seven screws [2].
NOTE
• Use care since the lengths of the
screws (*) shown on the illustration
are different from other screws.
9. Place the stand table upside-down,
and remove four casters [1].
3. Other
31