Printer Resist Loop - Konica Minolta bizhub C353 Service Manual

10. Service Mode
10.4.6

Printer Resist Loop

Functions • To set the correction value of the paper loop length for each process speed of tray 1,
tray 2 to tray 4 / LCT, bypass, and duplex.
• To adjust the length of the loop formed in paper before the registration rollers.
• Use "Paper Passage" for paper passage check.
Use When a paper skew occurs.
When a paper misfeed occurs.
Adjustment To decrease the loop amount: Decrease the setting value
Instructions To increase the loop amount: Increase the setting value
Adjustment • The adjustable range is different depending on paper source and processing speed.
Range
<bizhub C353>
166.6 mm/sec
55 mm/sec
<bizhub C253/C203>
110 mm/sec
55 mm/sec
Setting/ 1. Call the Service Mode to the screen.
2. Touch these keys in this order: [Machine] → [Printer Resist Loop].
Procedure
3. Select a paper source and a processing speed where the settings are made by
touching the corresponding keys.
4. Enter the new setting from the 10-key pad.
356
Tray 1/2 Tray 3/4 LCT
-5 to +5 -5 to +5
-15 to +15 -15 to +15
Tray 1/2 Tray 3/4 LCT
-8 to +8 -8 to +8
-15 to +15 -15 to +15
Field Service Ver. 3.0 Jan. 2008
Duplex Manual Tray
-5 to +5 -5 to +5
-8 to +8 -15 to +15
Manual Duplex
-8 to +8 -8 to +8
-8 to +8 -15 to +15