Konica Minolta bizhub C353 Service Manual page 359

8. Utility Mode
(10) Broadcast Result Report
Functions • To set the format to output the broadcast result report.
Use • To print out the broadcast result report
All Destinations : Outputs all reports after transmitting to all addresses
Each Destination : Outputs a report after each transmission
Setting/ • The default setting is All Destinations.
Procedure
(11) TX Result Report Check
Functions • To set whether to display the TX result report screen.
Use • To display the TX result report screen.
Setting/ • The default setting is OFF.
Procedure
(12) Network Fax RX Error Report
• Settings will be available when either [IP Address Fax] or [Internet Fax] is set to "ON" in
the following settings.
[Administrator Settings] → [Network Setting] → [Network Fax Setting] → [Network Fax
Function Settings]
Functions • To set whether to print RX error report when network fax function is being used.
Use • To print the error report at unusual situation such as receiving the image data that
cannot be processed.
Setting/ • The default setting is OFF.
Procedure
(13) MDN Message
• Settings will be available only when [Internet Fax] is set to "ON" in the following settings.
[Administrator Settings] → [Network Setting] → [Network Fax Setting] → [Network Fax
Function Settings]
Functions
• To set whether to print message when receiving response message to MDN request
when internet fax function is being used.
Use
Setting/ • The default setting is ON
Procedure
(14) DSN Message
• Settings will be available only when [Internet Fax] is set to "ON" in the following settings.
[Administrator Settings] → [Network Setting] → [Network Fax Setting] → [Network Fax
Function Settings]
Functions
• To set whether to print message when receiving response message to DSN request
when network fax function is being used.
Use
Setting/ • The default setting is OFF.
Procedure
314
"All Destinations"
ON
ON
"ON"
ON
Field Service Ver. 3.0 Jan. 2008
Each Destination
"OFF"
"OFF"
OFF
"OFF"