Konica Minolta bizhub C353 Service Manual page 309

8. Utility Mode
<ID & Print Operation Settings>
2
• This is displayed only when the function enhanced version 2 or later firmware is installed.
• It will be displayed only when the following setting shows that authentication device is set
to "installed".
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions
• To set whether to print all jobs or only one job from the same authenticated user
Use
Setting/ • The default setting is Print All Jobs.
Procedure
(2) User Registration
Functions • To register or change the user.
Use • To register, change or delete the user for authentication.
Setting/ 1. Select the user, and touch [Edit]
Procedure 2. Input the user name, user password, and e-mail address.
NOTE
• It cannot be entered when conducting authentication by external server.
3. Set the output permission, max allowance set, function permission, and touch [OK].
NOTE
• When the public users are allowed, the output permission and the function
• [Authentication Information Registration] does not appear when the presence
• [Output Permission], [Max. Allowance Set], and [Function Permission] do not
(3) User Counter
Functions • To display the status of use of the copy+print, copy, print and scan/fax for each user.
Use • To check the status of use of the copy+print, copy, print and scan/fax for each user.
Setting/ 1. Select the user and touch [Counter Details].
Procedure 2. Select the key to check to see the status of use.
3. For clearing the counter, touch [Clear Counter].
4. For clearing the all counters, touch [Reset All Counters].
264
2
when ID & Print is selected.
"Print All Jobs"
permission can be set.
of Authentication Device 2 is set in the following setting.
[Service Mode] → [Billing Setting] → [Management Function Choice]
appear when the presence of Management Device 1 is set in the following set-
ting.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Field Service Ver. 3.0 Jan. 2008
Print Each Job