Konica Minolta bizhub C353 Service Manual page 286

Field Service Ver. 3.0 Jan. 2008
<Initialize+Image Stabilization>
Functions • To carry out an image stabilization sequence after the historical data of image stabili-
zation control has been initialized.
Use • Use if an image problem persists even after [Gradation Adjustment] has been exe-
cuted.
• Use if tone reproduction and maximum density are faulty even after image stabiliza-
tion has been executed.
Setting/ 1. Call the Administrator Settings to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Image Stabilization] →
Procedure
[Initialize+Image Stabilization].
3. Press the Start key to start Stabilizer.
The Start key turns red and stays lit up red during the Stabilizer sequence.
4. Stabilizer is completed when the Start key turns blue.
8. Utility Mode
241