Konica Minolta bizhub C353 Service Manual page 271

8. Utility Mode
(2) ICC Profile Settings
Functions • To select a profile to be used for print jobs from a computer when a profile is not
specified by printer driver.
Use • Possible to set a profile separately for each of the following items.
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile
Simulation Profile
Setting/ • The default settings are shown below.
Procedure
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile
Simulation Profile
E. XPS Settings
(1) Verify XPS Digital Signature
Functions • Selects whether to verify digital signatures attached to XPS (XML Paper Specifica-
tion) files when printing the files.
Use
• When digital signature verification is selected, files with invalid digital signatures are
not printed.
Setting/ • The default setting is OFF.
Procedure
F. Print Reports
• It will not be displayed when the following setting shows that authentication device 1 or
vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
Functions • To output the report or demo page concerning the print setting.
Use • To check the setting concerning the printer.
The types of report available for output are as follows.
Configuration Page : The list of printer setting will be output.
Demo Page
PCL Font List
PS Font List
1. Touch [User Setting] → [Printer Setting] → [Print Reports].
Setting/
Procedure 2. Select the report to be output.
3. Select the feed tray.
4. Select Simplex or Duplex print, and touch the Start key.
226
: Device Color
: Auto
: Device Color
: Auto
: Device Color
: Auto
: None
ON
: The test page will be output.
: PCL font list will be output.
: PS font list will be output.
Field Service Ver. 3.0 Jan. 2008
"OFF"