Initialize - Konica Minolta bizhub C353 Service Manual

3. Service Mode
3.4.4

Initialize

• When license management information cannot be repaired, initialize the information with
the following procedure.
1. Contact the license management section of sales company to report the information
necessary to issue the initialize code.
2. The license management section of sales company supplies the initialize code.
3. Call the Billing Setting to the screen.
See P.4
4. Touch [License Management] → [Initialize].
5. Enter the initialize code issued by call center using the keyboard on the screen, and
touch [Apply].
6. After completing the initialization, follow the message appearing on the screen and turn
OFF and ON the main power switch.
20
Field Service Ver. 1.0 Jan. 2008
A0PDF3E541DA