Other - Konica Minolta bizhub C353 Service Manual

3. Other

3.4 Disassembly/Assembly procedure
3.4.1 Finisher unit right front cover
[1]
3.4.2 Finisher unit left front cover
1. Remove the front door.
See P.21
[1]
[2]
3.4.3 Finisher unit rear cover
1. Remove the finisher unit.
See P.28
[1]
[2]
[1]
20
[3]
[2]
4511F2C562DA
A01GF2C507DA
[3]
A01GF2C519DA
Field Service Ver. 3.0 Jan. 2008
1. Open the front door.
2. Remove two screws [1] and remove
the finisher unit right front cover [2].
NOTE
• At reinstallation, first fit the tab [3]
into position.
2. Remove two screws [1] and remove
the finisher unit left front cover [2].
2. Remove four screws [1] and remove
the finisher unit rear cover [2].
3. Disconnect the connector [3].