Konica Minolta bizhub C353 Service Manual page 319

8. Utility Mode
(2) Netware Print Settings
Functions • To set whether to use the NetWare print mode.
• To set the NetWare print mode.
• To display NetWare status.
Use • To change the NetWare print mode.
• To check NetWare status.
Setting/ <Netware Print Settings>
Procedure • The default setting is ON.
<NetWare Print Mode>
• The default setting is PServer.
• After selecting either key in the NetWare print mode setting, proceed to each setting
screen.
<Status>
1. Touch [Status].
2. Touch up/down arrow keys to select the server to check.
3. Check the NetWare status.
(3) P Server Settings: Print Server Name/Print Server Password
Functions • To set the print server name and print server password.
Use • To enter the print server name or the print server password.
Setting/ 1. Touch [Print Server name] or [Print Server Password].
Procedure 2. Enter the print server name or the print server password (up to 63 characters) using
the on-screen keyboard, and touch [OK].
(4) P Server Settings: Polling Interval
Functions • To set the polling interval.
Use • To set the interval to search the print queue.
Setting/ 1. Press the Clear key.
Procedure 2. Enter the polling interval between 1 and 65535 using the 10-key pad.
(5) P Server Settings: NDS/Bindery Setting
Functions • To set whether to enable or disable the bindery setting when using NetWare4.x
model and after.
Use • To enable the bindery service.
Setting/ • The default setting is NDS.
Procedure
274
"ON"
"PServer"
"NDS"
Field Service Ver. 3.0 Jan. 2008
OFF
Nprinter/Rprinter
NDS/Bindery