Konica Minolta bizhub C353 Service Manual page 75

3. Periodical check
[2]
[1]
[1]
12. To reinstall, reverse the order of removal.
13. Replace the tray 2 separation roller assy.
See P.31
14. Select [Service Mode] → [Counter] → [Life] and clear the count of [2nd.].
See P.404
30
[3]
A02EF2C020DA
[2]
A02EF2C021DA
Field Service Ver. 3.0 Jan. 2008
10. Remove two C-clips [1] and two
bearings [2]. Slide the tray 2 feed
roller [3] in the direction of the arrow.
11. Remove the C-clip [1], and remove
the tray 2 feed roller [2].