Konica Minolta bizhub C353 Service Manual page 493

12. Billing Setting
NOTE
• Performing the setup for each unit to be mounted will internally change the setting
values below. It needs resetting when cancelling the setting in order to set back to
"not mounted" because the setting value will remain.
Setting Item
Default Copy
Settings
Default Scan/Fax
Settings
Copy Operating
Screen
Fax Active Screen
Scan/Fax Settings
Default Tab
Left Panel
Display Default
Each Function Set-
ting (When IC-409
is not mounted)
Each Function Set-
ting (When IC-409
is mounted)
Administrator
Security Level
Weekly Timer ON/
OFF Setting
Reset Setting
2
Application Key
2
Settings
Restrict Access to
Job Settings
External Memory
Function Settings
2 ID & Print Settings
Forward TX Setting
Line Parameter
Setting
OpenAPI Setting
IPP Setting
448
2
Authentication
Vendor 2
Device 1
Factory Default
Factory Default
[Yes]
Rx Display [Yes]
⎯
Direct Input
[Job List]
Copy, PC print, Copy, PC print,
Send Data, and Send Data, and
Print others will Print others will
be set to "ON". be set to "ON".
Send Data will be set to "ON".
Prohibit
⎯
OFF
Reset Data After
⎯
Job will be set to
"ON".
When Key 1 is set to My Panel, reset
the setting and assign Key 1 to [FAX/
SCAN]. When Key 2 is set to My
Panel, reset the setting and assign
Key 2 to [Copy].
Changing Job Priority, Deleting
Other User's Jobs, Registering and
Changing Addresses, Changing
Zoom Ratio will be set to "Restrict".
Save Document and Print Docu-
⎯
ment will be set to "OFF".
⎯ ⎯
OFF
⎯ ⎯
Access Setting
will be set to
Access Setting
"Restrict" and
will be set to
Authentication
"Restrict".
will be changed
to "OFF" setting.
IPP Setting will
be set to "OFF",
⎯
and Accept IPP
job will be set to
"OFF".
Field Service Ver. 3.0 Jan. 2008
Management
Key Counter
Device 1
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
Copy will be set
to "ON".
PC print, Send
⎯
Data, and Print
others will be set
to "OFF".
⎯ ⎯
⎯ ⎯
⎯ ⎯
When Key 1 is set to My Panel, reset
the setting and assign Key 1 to [FAX/
⎯
SCAN]. When Key 2 is set to My
Panel, reset the setting and assign
Key 2 to [Copy].
⎯ ⎯
⎯
ID & Print will
⎯
be set to "ON".
⎯ ⎯
⎯ ⎯
⎯ ⎯
⎯ ⎯
Management
Device 2
⎯
⎯
⎯
⎯
⎯
⎯
Copy, PC print,
Send Data, and
Print others will
be set to "ON".
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Receive Mode
will be set to
"Auto RX".
⎯
⎯