Konica Minolta bizhub C353 Service Manual page 277

8. Utility Mode
F. Restrict User Access
(1) Copy Program Lock Settings
Functions • To set the prohibition for modifying the registered copy program.
Use • To be used when prohibiting the user from changing the copy program.
Setting/ 1. Touch the key for the appropriate copy program.
Procedure 2. Touch [OK].
(2) Delete Saved Copy Program
Functions • To delete the registered program job.
Use • To delete the registered program job.
Setting/ 1. Touch the appropriate program job.
Procedure 2. Touch [Delete].
3. Touch [Yes] on the check screen to delete the program job.
(3) Restrict Access to Job Settings
• It will not be displayed when the following setting shows that authentication device 1 or
vendor 2 is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
<Changing Job Priority>
Functions
• To set whether to allow or restrict the change on the print priority for the job.
Use
Setting/ • The default setting is Allow.
Procedure
<Delete Other User Jobs>
Functions
• To set whether to allow or restrict job delete by other users when the user is authenti-
cated.
Use
Setting/ • The default setting is Restrict.
Procedure
<Registering and Changing Addresses>
Functions
• To set whether to allow or restrict the change of the registered address.
Use
Setting/ • The default setting is Allow.
Procedure
NOTE
• [Allow] cannot be selected when the following setting is set to "ON".
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode]
232
"Allow"
Allow
"Allow"
Field Service Ver. 3.0 Jan. 2008
Restrict
"Restrict"
Restrict