Konica Minolta bizhub C353 Service Manual page 785

7. Mechanical adjustment
D. Manual adjust: Sub Scanning Direction 1-Sided/2-Sided document stop position
adjustment
40
[1]
A01HF3C516DA
A01HF3E531DA
[1]
A01HF3C516DA
Field Service Ver. 2.0 Jan. 2008
5. Place the chart [1] in the document
feed tray (with the side having an
arrow facing up).
6. Press the Start key.
7. Make sure that result is OK. Then,
touch [SET].
8. Touch [END].
9. Touch [Exit] on the Service Mode
screen.
10. Turn OFF the main power switch,
wait for 10 sec., then turn the switch
ON.
NOTE
If the result is Unable:
• Check and correct the skew of the
document.
• Manually correct the value of [Origi-
nal Stop Position].
See P.42
1. Place the chart [1] in the document
feed tray (with the side having an
arrow facing up).
2. Make a full size copy of the chart.