Konica Minolta bizhub C353 Service Manual page 356

Field Service Ver. 3.0 Jan. 2008
(5) Incomplete TX Hold
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Re-Transmission]
• It will not be displayed when the following setting shows that Management Device 2 is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set whether to use incomplete TX hold function.
Use • To re-send the data failed to be sent after a given time.
Setting/ • The default setting is No.
Procedure
• When set to Yes, specify the Incomplete TX Hold Time.
(6) PC-Fax RX Setting
• It will not be displayed when [Forward TX Setting], [Memory RX] or [TSI User Box Set-
ting] is set to "ON."
Functions • To set whether to use the PC-FAX reception function.
Use • To store the received text file in the box in the hard disk.
Setting/ • The default setting is Restrict.
Procedure
• When Allow is selected, make the settings of Receiving user box destination, Print
ON/OFF, and Password check ON/OFF.
(7) TSI User Box Setting
• It will not be displayed when [Forward TX Setting], [Memory RX] or [PC-Fax RX Setting]
is set to "ON."
Functions • To set whether to use TSI distribution or not.
• To set setting method when there is no matched box at receiving.
Use • To use TSI distribution.
• To change setting method when there is no matched box at receiving.
Automatically Print
Memory RX Use Box : To store the received data in the forced memory receiving
Setting/ <TSI User Box Setting>
Procedure • The default setting is No.
• Press [TSI User Box Registration] and register the distribution.
<Non-matched Box Setting>
• The default setting is Automatically Print.
Yes
Allow
: To print the received data.
box.
Yes
"Automatically Print"
8. Utility Mode
"No"
"Restrict"
"No"
Memory RX User Box
311