IMAGE SETTINGS menu
IMAGE SETTINGS menu
Select an item from the Image Settings menu using
the ▲/▼ cursor buttons, and press the ► cursor
button or ENTER button to execute the item. Then
perform it according to the following table.
Item
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Using the ◄/► buttons adjusts the brightness.
Dark ó Light
Using the ◄/► buttons adjusts the contrast.
Weak ó Strong
Using the ◄/► buttons adjusts the strength of whole color.
Weak ó Strong
• This item can be selected only for a video and component video
signal.
TM
• For HDMI
and HDBaseT
ed if either (1) or (2) applies.
(1) DIGITAL FORMAT item in the INPUT menu for selected port is
set to VIDEO.
(2) DIGITAL FORMAT item in the INPUT menu for selected port is
set to AUTO, and the projector recognizes that it receives video
signals.
Using the ◄/► buttons adjusts the tint.
Reddish ó Greenish
• This item can be selected only for a video and component video
signal.
TM
• For HDMI
and HDBaseT
ed if either (1) or (2) applies.
(1) DIGITAL FORMAT item in the INPUT menu for selected port is
set to VIDEO.
(2) DIGITAL FORMAT item in the INPUT menu for selected port is
set to AUTO, and the projector recognizes that it receives video
signals.
Using the ◄/► buttons adjusts the sharpness.
Weak ó Strong
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
Description
TM
signals, this item can also be select-
TM
signals, this item can also be select-
56