Adjusting The Image; Before You Begin; Size And Position Menu - Christie RPMX-D132U User Manual

Section 3: Operation
3.5

Adjusting the Image

The most commonly used options for image adjustments are accessed through 2 menus:
Size and Position (
you can change settings effecting the image from the current channel by working with the appropriate
slidebars, checkboxes and drop-down lists.
Exit
Pressing will return to the previous menu (or to the presentation, if from the Main menu) and accept any
changes you may have entered. Settings are saved with the current channel.
From your presentation, you can access the individual options in these menus by pressing
two-digit number representing their location in the menu system. For example, press
the "Gamma" option in the Image Settings menu.
For some options, you may prefer to use a "direct key" from presentation level to go directly to a particular
option without traveling through the menu system
NOTE: Available for some display parameters only.
For example, press
presentation.
NOTES: 1) To hide these "direct" slidebars, disable the" Display Slidebars" checkbox in the Menu
Preferences menu.
2) To hide the entire menu system from view, toggle the on-screen display by pressing the

3.5.1 Before You Begin

The first step in optimizing the image is to perform an Auto Setup. This initiates an automated process in
which the projector optimizes critical display parameters such as size, position, pixel tracking, etc., based on
the type of incoming source data detected. An Auto Setup can save considerable setup time, and you can still
modify the adjustments using menu options described below.
For best results, select an image that does not display black borders, and has some white and black content.
Then press
Auto
3.6

Size and Position Menu

3-20
1
) and Image Settings (
Menu
to access the "contrast" slidebar immediately. Press
Contra st
.
F
IGURE
2
), both appear in the Main menu. From either menu,
Menu
3-18 S P
IZE AND OSITION
Menu
Exit to return to your
M
ENU
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
Menu followed by the
2 3
to access
keys.
OS D
020-100245-03 Rev. 1 (11-2010)