2: Service Guidelines; Before Servicing; Lead Dress; Order Parts - Christie Entero RPMWU-LED01 Service Manual

2 Service Guidelines
2.1

Before Servicing

Read all instructions before servicing. Always take extra precautions to secure all harnessing properly,
especially in high voltage circuitry areas.

2.1.1 Lead Dress

Before servicing, always carefully observe the original lead dress. Take extra precautions to secure all
harnessing properly, especially in the high voltage circuitry areas (such as lamp cables). Replace wires with
damaged insulation.

2.1.2 Order Parts

When ordering replacement parts, quote the part numbers of the items required. See Table 4.1 Service Parts
List and 2.2 Safety Warnings and
of manufacture.
NOTE: Some parts identified in the service parts list may not be available separately. In addition, some parts
stocked as inventory are available only until the current supply lasts. All part numbers are subject-to-change.

2.1.3 Replace Modules

Check module markings, parts lists and the relevant disassembly/replacement procedure outlined in
Parts and Module Replacement
is replaced correctly.
Components must be replaced with exact equivalents. Failure to do so may result in unsafe operation.
Entero RPMSP/RPMWU/RPMHD-LED01 Service Manual
020-100368-05 Rev. 1 (06-2012)
Guidelines. Also quote the projector model number, serial number, and date
to make sure you have the correct module for the projector and that the module
Section 4
2-1