Table of Contents
Advertisement
C
Precautions/Limitations
C.1
Precautions/Limitations on Main Unit
This section gives notes and limitations that you should follow when using this
printer.
About the optional Hard Disk Drive
When the Hard Disk Drive is installed, a power failure during use may destroy
●
data on the Hard Disk Drive.
When the Hard Disk Drive is installed, you can specify the Hard Disk Drive to
●
store printing data from lpd, SMB, or IPP. The forms of ESC/P and HPGL/2 are
always stored on the hard disk and cannot be transferred to a different place.
Initializing the Hard Disk Drive deletes added fonts, forms of ESC/P and PCL,
●
ESC/P user-defined data, and SMB folder. The secure prints and logs are not
deleted.
When the print result is different from the settings
Insufficient capacity of the print page buffer may cause unexpected print results
such as the following: In this case, it is recommended to add memory capacity.
Printed only on one side of the paper when 2 sided print is specified.
●
The job is cancelled (when the data cannot be stored in the print page buffer,
●
the job including the page is canceled).
About options
For using the secure/sample/delayed print feature and the Page Print mode,
●
the optional Hard Disk Drive is required.
About the meter count for 2 sided prints
For 2 sided print, a sheet of plain paper may be inserted for adjusting pages
according to the specified number of copies, depending on the application in use.
In this case, blank sheets inserted by the application are counted as 1 page.
About available paper for 2 sided print
Paper of 64 to 169 g/m
of 129 gm2 or more for a 2 sided print, the range of printed text on the reverse
side may be out of alignment. It is recommended to use Tray 5 (Bypass) to man-
ually print both sides of the paper if you print paper of 129 g/m
2
can be used for 2 sided print. However, if you use paper
2
or more.
313
Advertisement
Table of Contents
Troubleshooting
