Real-Time Reference, Single Tripod - Leica GPS1200 Series Technical Reference Manual

1.7
Use
Description
Equipment Setup

Real-Time Reference, Single Tripod

The equipment setup described below is to be used for real-time reference stations with the
need of normal radio coverage. Raw observation data may also be collected for post-
processing.
The receiver and RX1200 if used can be assembled to make one unit. The receiver clips to
the tripod leg. Connections are made to the GNSS and radio antenna. The radio antenna is
mounted on the antenna arm which clips to the GNSS antenna. Note that the receiver can
be programmed with the RX1200 prior to use which can then be omitted from the setup.
The GX1210 and GX1220 can be used as a DGPS reference station if they are fitted with
the DGPS option. They cannot be used as a real-time reference station.
• GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-
dures may vary slightly.
• Standard radio mounted in radio housing is used throughout the instructions. Digital
cellular phones may also be used but the setup may differ slightly.
GPS1200 51