Post-Processed Kinematic, All-On-Pole - Option 2 - Leica GPS1200 Series Technical Reference Manual

Equipment Setup
1.6
Use
Description

Post-Processed Kinematic, All-on-Pole - Option 2

The equipment setup described below is to be used for post-processed kinematic rover
surveys with short periods of use, especially where there are many obstacles such as fences.
The RX1200, with the receiver attached, is fixed to the pole grip with a holder. One connec-
tion is needed to connect the GNSS antenna to the receiver.
• GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-
dures may vary slightly.
• Aluminium poles are used. They may be replaced with their carbon fibre equivalent
without any change to these instructions.
GPS1200 48