Setting The Fieldnet Radio Group Id - Leica iNEX User Manual

15.2 Setting the FieldNET Radio Group ID

If radio interference is experienced when using FieldNET, the Group ID may
need to be changed. If changing the Group ID on one radio then all radios
that are intended to work together must be changed to match.
1. Start the iNEX into Launcher mode (see 12.1 Starting Up in Launcher
Mode).
2. Press UTILITIES.
3. Enter and press OK.
123
4. Press
RINEX
5. Press
RADIO
6. Press
CONNECT FOR
7. Press
CREATE RANDOM ID
ENTER NEW ID
required Group ID value.
iNEX User Manual
TOOLS.
TOOLKIT.
DIAGNOSTICS.
or press
and enter the
Page 122 Rev 2