Set Norm Safety Stop - Aeris Elite T3 Operating Manual

SET NORM SAFETY STOP

> Graphic SAFE
> Symbol s STOP and TIME.
> Safety Stop Time Set Point, fl a shing.
> Safety Stop Depth Set Point and symbol FT (or M).
 Pressing and rel e asing the S button momentaril y (< 2 seconds each) wil l step through
the Stop Time Set Points of OFF, 3:00, and 5:00 (minutes:seconds).
 Pressing and rel e asing the A button momentaril y (< 2 seconds) wil l save the Stop Time
setting and the Stop Depth Set Point wil l fl a sh, or if Stop Time is set OFF advance to
the SET CONS (Conservative Factor) screen with the Set Point fl a shing.
 Pressing and rel e asing the S button momentaril y (< 2 seconds each) wil l step through
the Stop Depth Set Points of 10, 15, and 20 FT (or 3, 4, 5, and 6 M).
 Pressing and rel e asing the A button momentaril y (< 2 seconds) wil l save the Safety
Stop settings and/or advance to the SET CONS screen with the Set Point fl a shing.
 Pressing the A button repeatedl y (< 2 seconds) wil l step through the other SET U
screens.
46
information incl u des (Fig. 38):
 Depressing the A and S buttons simul t aneousl y for 2 seconds
wil l save the settings and revert to the SET U screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to the
NORM or GAUG SURF MAIN screen.