Set Dtr (Dive Time Remaining) Alarm - Aeris Elite T3 Operating Manual

SET DTR (DIVE TIME REMAINING) ALARM

Information incl u des (Fig. 31):
> Graphic DTR
> Symbol s AIR, TIME, NDC, and O2.
> Set Point val u e, fl a shing.
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l increase the Set Point from 0:00 to 0:20
(:minutes) in 1 minute (0:01) increments.
 Depressing the S button wil l scrol l through the Set Points at
a rate of 4 Set Points per second until it is rel e ased.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
TURN PRESSURE ALARM screen with the Set Point fl a shing.
 Pressing and rel e asing the A button momentaril y and
repeatedl y (< 2 seconds each) wil l step through the other
SET A screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert o the SET A screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
hichever Time (No
Decompression, O2,
or Air Time Remain-
ing) decreases to the
Al a rm Set Point wil l
activate the Al a rm.
39