Set Norm Safety Stop - Aeris Manta Operating Manual

 Pressing and releasing the A button momentarily (< 2 seconds) will save the
setting and/or advance to the SET SAFETY STOP screen with the Time Set
Point flashing.
 Pressing and releasing the A button momentarily and repeatedly (< 2 seconds
each time) will step through the other SET U screens.
 Depressing the A and S buttons simultaneously for 2 seconds will save the
setting and revert back to the SET U screen.
 Depressing and holding the button for 2 seconds or if no button is pressed
for a period of 2 minutes operation will revert to the NOR or GAUG SURF
AIN screen.
SET ORM SAFETY STOP information includes (Fig. 49):
> Graphic SAFE
> Safety Stop Depth Set Point with FT (or ) icon.
> Safety Stop Time Set Point (min:sec) flashing, with STOP and TI E icons.
 Pressing and releasing the S button momentarily (< 2
seconds each time) will step through the Stop Time Set
Points of OFF, 3:00, and 5:00 (min:sec).
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Stop Time setting and the Stop
Depth Set Point will flash, or if Stop Time is set OFF
advance to the SET CONS (Conservative Factor) screen
with the Set Point flashing.
 Pressing and releasing the S button momentarily (< 2
seconds each time) will step through the Stop Depth Set
Points of 10, 15, and 20 FT (or 3, 4, 5, and 6 ).
55