Aeris Elite T3 Operating Manual page 111

NOTE: The graphic NotAvAil (Not Available)
(Fig. 96) indicates that the Buddy is out of range
or the Elite T3's TMT (or 3) setting does not
match the Serial Number of that Buddy's TMT.
BUDDY PRESSURE CHECK ON SURFACE
A Buddy Pressure Check can be accompl i shed when on the
Surface by accessing the TMT Status Check screens whil e the
NORM SURF MAIN screen is being displ a yed.
 Depressing and hol d ing the S button for 2 seconds wil l
activate the El i te T3's Receiver and access the TMT Status
screens and Pressures of the Tanks reporting.
 TMT 2 and TMT 3 Battery Status is not displ a yed when TMT
2- 3 USE is set for BUD (Buddy Check).
 If a TMT is not active and l i nked to the El i te T3, the message
NotAvAil (Not Avail a bl e ) wil l appear.
 Each screen wil l be displ a yed for 3 seconds.
 The displ a y wil l then revert to the NORM SURF MAIN
screen.
111