Set Depth Alarm - Aeris Elite T3 Operating Manual

36

SET DEPTH ALARM

> Graphic DPTH
> Symbol s MAX and FT (or M)
> Set Point graphic val u e, fl a shing.
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l step through the Set Points from 30 to 330 FT
(10 to 100 M) in 10 FT (1 M) increments at a rate of 1 Set
Point per press of the button.
 Depressing and hol d ing the S button wil l scrol l through the
Set Points at a rate of 4 Set Points per second until it is
rel e ased.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
EDT (El a psed Dive Time) ALARM screen with the Set Point
fl a shing.
 Pressing and rel e asing the A button momentaril y and
repeatedl y (< 2 seconds each time) wil l step through the
other SET A screens.
 Pressing the A and S buttons simul t aneousl y for 2 seconds
wil l save the setting and revert to the SET A screen.
 Depressing and hol d ing the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation wil l
revert to the NORM or GAUG SURF MAIN screen.
FREE Mode has separate Depth Al a rms.
information incl u des (Fig. 28):