Set Fo2 Gas 1 - Aeris Elite T3 Operating Manual

SET FO GAS 1,
> Graphic GAS1
> PO2 Al a rm Set Point with graphic PO2, if Nitrox
> Symbol FO2 and FO2 Set Point val u e, fl a shing
> Tank 1 icon representing GAS 1
> Symbol NITROX (if set for a numerical val u e).
> Max Depth al l o wed for the PO2 Al a rm Set (if 21 to 50%)
 Depressing and hol d ing the S button whil e the Set Point is
fl a shing wil l scrol l the Set Points from AIR (Fig. 21) to 21
through 50% in 1% increments, at a rate of 8 per second.
 Hint: The scrol l wil l stop when the button is rel e ased, or
momentaril y at 32% (even if the button is hel d depressed).
 Pressing and hol d ing the S button wil l resume the scrol l from
32 (Fig. 22) through 50%, then stop at AIR (or 21%).
 Pressing and rel e asing the S button wil l advance FO2 in
increments of 1% per press of the button.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to SET FO2
GAS 2 with the Set Point fl a shing.
 Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET F screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET F screen.
 Depressing the M button for 2 seconds or if no button
action for 2 minutes wil l revert to NORM or GAUG SURF.
information incl u des:
31