Set Units - Aeris Elite T3 Operating Manual

information incl u des (Fig. 37):

SET UNITS

> Graphic UNIT
> Set Point symbol s /graphics PSI, F, and FT (or BAR, C, and
M), fl a shing.
 Pressing and rel e asing the S button wil l toggl e between
Imperial (F, FT, PSI) and Metric (C, M, BAR).
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
SAFETY STOP screen with the Time Set Point fl a shing.
 Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET U screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET U screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
HINT: To change this setting while operating in
FREE Mode, first access the NORM SURF Mode.
45