Setting the NIBG
Al a rm to activate
before the El i te T3
enters DECO is highl y
recommended.
38
SET NIBG (NITROGEN LOADING BAR GRAPH) ALARM
Information incl u des (Fig. 30):
> Graphic NIBG
> NIBG Set Point (segments), fl a shing.
Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l decrease the Set Point from Al l 5 segments
(Deco) to 1 in increments of 1 segment.
Depressing the S button wil l scrol l through the Set Points at
a rate of 4 Set Points per second until it is rel e ased.
Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
DTR (Dive Time Remaining) ALARM screen with the Set
Point fl a shing.
Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET A screens.
Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET A screen.
Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
FREE Mode has a separate NIBG Al a rm.