Plan Mode Lead-In - Aeris Elite T3 Operating Manual

If FO2 for GAS1 is set for a numerical val u e (21 to 50%), the NITROX graphic and Maxi-
mum Operating Depth defined by the PO2 ALARM Set Point wil l be displ a yed.
If the l i miting time factor is Oxygen control l e d, the symbol s TIME and O2 wil l be dis-
pl a yed. If the l i miting time factor is Nitrogen control l e d, the symbol s TIME and NDC wil l
be displ a yed.
 Prior to a first dive of a series, pressing and rel e asing the A
button momentaril y (< 2 seconds) wil l advance to LOG
MODE.
 After a dive is made, it wil l advance to FLY MODE.
 Depressing the M button for 2 seconds, or if no button is
pressed during a 2 minute period, operation wil l revert to
the NORM SURF MAIN screen.

PLAN MODE LEAD-IN

> Graphic PLAN.
> PO2 Al a rm Set Point and graphic PO2, if set for Nitrox.
> FO2 icon and FO2 Set Point for GAS 1.
> Tank 1 icon representing GAS 1.
> Symbol NITROX, if set for Nitrox.
 Press and rel e ase the S button momentaril y (< 2 seconds) to
access the first screen (30 FT/9 M) of the Pre Dive Pl a nning
Sequence (PDPS).
information incl u des (Fig. 52A/B):
63