Set Turn Pressure Alarm (For Transmitter 1 Only) - Aeris Elite T3 Operating Manual

40
SET TURN PRESSURE ALARM
Information incl u des (Fig. 32):
> Graphic TURN
> Set Point OFF or a numeric val u e, fl a shing.
> Symbol PSI (or M)
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l step through the Set Points from OFF to 1000
to 3000 PSI (70 to 205 BAR) in 250 PSI (5 BAR)
increments.
 Depressing the S button wil l scrol l through the Set Points at
a rate of 4 Set Points per second until it is rel e ased.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
END PRESSURE ALARM screen with the Set Point fl a shing.
 Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET A screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET A screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
(for Transmitter 1 only)