60
SERIAL NUMBER (Elite T3)
Depressing the A and S buttons simul t aneousl y for 10
seconds whil e viewing the NORM or GAUG SURF MAIN
screen wil l access the VT3's SERIAL NUMBER screen
displ a ying (Fig. 50):
> Graphic SN
> Factory programmed Serial Number of the El i te T3.
> Firmware revision number (e.g., graphic r1A).
Depressing the A and S buttons simul t aneousl y for 2
seconds wil l revert to the SURF MAIN screen.
Depressing the M button for 2 seconds wil l revert to the
SURF MAIN screen.
If no button is pressed during a period of 2 minutes, the unit
wil l revert to the SURF MAIN screen.
NOTE: The Serial Number and Firmware Revi-
sion will be requested in the event that you
contact AERIS regarding your Elite T3. Enter
them in the Records section provided in the back
of this Manual.