Aeris Elite T3 Operating Manual page 126

1 6
SET FREE CDT STATUS Display (Surface only),
information incl u des (Fig. 108) -
> Graphics TIMR and SEt, sol i d.
> TIME symbol and Timer setting (min:sec), col o n sol i d,
MINUTE Set Point fl a shing.
 Depressing and hol d ing the S button whil e the MINUTE Set
Point is fl a shing wil l scrol l through the Set Points at a rate of
4 per second from 0: to 59: in 1 Minute (1:) increments.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the MINUTE Set Point displ a yed and
advance to Set SECONDS with the Set Point fl a shing.
 Depressing and hol d ing the S button whil e the SECONDS
Set Point is fl a shing wil l scrol l through the Set Points at a
rate of 4 per second from :00 to :59 in 1 Second (:01)
increments.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the CD Timer Set Point indicated by the
graphic OFF fl a shing (Fig. 109) in pl a ce of the graphic SEt.
 Pressing and rel e asing S button momentaril y (< 2 seconds)
wil l toggl e to ON and Start the CD TIMER.
 Pressing the A button momentaril y (< 2 seconds, or if the M
button is depressed for 2 seconds, or if no button is pressed
during a period of 2 minutes, the Displ a y wil l revert to the
FREE SURF MAIN screen.