Norm Surf Main-Button Operations - Aeris Elite T3 Operating Manual

NORM SURF MAIN
 Pressing the S button wil l activate the Smartgl o Backl i ght.
 Pressing and rel e asing the A button repeatedl y (< 2 seconds each time) wil l step
through the NORM Surface Sequence -
NORM SURF MAIN > NORM SURF ALT > PLAN > FLY > SAT > LOG > HISTORY.
 Depressing both the A and S buttons simul t aneousl y for 2 seconds wil l access the SET
Menu (F > A > U > T) and an El i te T3 Serial Number displ a y.
SURF MAIN > SET FO2 > SET Al a rms > SET Util i ties > SET TIME > SN
 Pressing and hol d ing the M button for 2 seconds wil l access the GAUG SURF MAIN
screen, then another 2 second press wil l access the FREE SURF MAIN screen.
NORM SURF > GAUG SURF > FREE SURF
 Depressing the S button for 2 seconds whil e viewing the NORM SURF screen wil l
activate the El i te T3's Receiver and access a series of screens that wil l indicate the
Status of the Batteries and Pressures of the Tanks in use. Transmitter Battery Status is
not displ a yed for TMT 2 and 3 if TMT 2- 3 USE is set for Buddy Pressure Check.
 If a Transmitter (abbreviated TMT) is not active and l i nked to the El i te T3, the message
NotAvAil (Not Avail a bl e ) wil l appear.
 Each screen wil l be displ a yed for 3 seconds. El i te T3 Battery Status, then TMT 1
Battery Status and Tank Pressure, then TMT 2 Battery Status and Tank Pressure, then
TMT 3 Battery Status and Tank Pressure, then revert to SURF MAIN
6
- Button Operations: