TMT is the abbrevia-
tion for Transmitter.
BUD is the abbrevia-
tion for Buddy.
50
information incl u des (Fig. 42):
SET TMT 1
> Graphics TMT1 and ON (or OFF) fl a shing.
> Set Point (Transmitter's Serial Number (Link Code).
Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l toggl e between ON and OFF.
Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l accept the ON/OFF sel e ction.
If OFF is sel e cted, SET TMT 2- 3 USE , SET TMT 2 (or BUD
1), and TMT 3 (or BUD 2) wil l be bypassed and operation
wil l revert to the SET U screen.
If ON is sel e cted, the first (l e ft) digit of the Code wil l fl a sh.
Pressing and rel e asing the S button repeatedl y (< 2 seconds
each) wil l increase the First Digit from 0 to 9 in increments
of 1.
Depressing the S button wil l scrol l through the Set Points at
a rate of 4 per second.
Pressing and rel e asing the A button (< 2 seconds) wil l
accept the First Digit of the Code and/or advance to the
Second Digit which wil l be fl a shing.
Pressing and rel e asing the S button wil l increase the Second
Digit from 0 to 9 in increments of 1.
Depressing the S button wil l scrol l through the Set Points at
a rate of 4 per second.