Aeris Elite T3 Operating Manual page 140

a
140
CARE AND CLEANING
Protect your El i te T3 from shock, excessive temperatures,
exposure to chemical s , and tampering. Protect the l e ns against
scratches with a Instrument Lens Protector. Smal l scratches wil l
natural l y disappear underwater.
 Soak and rinse the El i te T3 in fresh water at the end of
each day of diving, and check to ensure that the areas
around the Low Pressure (Depth) Sensor (Fig. 124a), PC
Interface Data Port (Fig. 124b), and Buttons are free of
debris or obstructions. Soak and rinse the Regul a tor(s)
with the Transmitter(s) attached.
 To dissol v e sal t crystal s , use l u kewarm water or a sl i ghtl y
acidic bath (50% white vinegar/50% fresh water). After
removal from the bath, pl a ce the El i te T3 and the
Regul a tor(s) with Transmitter(s) unit under gentl y running
water and towel dry before storing.
 Transport your El i te T3 system cool , dry, and protected.
INSPECTIONS AND SERVICE
b
Your El i te T3 shoul d be inspected annual l y by an Authorized
AERIS Deal e r who wil l perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
l i mited warranty in effect, this inspection must be compl e ted
one year after purchase (+/- 30 days).