Watch.mode; Watch.time; Main.time; Set.date/Time - Aeris F11 Operating Manual

WATCH TIME
Main Time is the default screen displayed while in Watch Mode. In addition to Time of Day and Date, Day of the Week will be
displayed which you can interchange with Dual Time which is an hour based differential that you can set. You can choose to have
Watch Main Time displayed with Day of the Week or with Dual Time (such as when visiting a location in a different time zone).
Once Dual Time is set (by hour differential), it will automatically change when Watch Main Time is changed.
While viewing Watch Main Time you can access a sequence of selections including >>
ALT (additional data), Countdown Timer, Daily Alarm, Set Time, and Chronograph.
Button operations >>
• A (< 2 sec) - to step forward through the sequence.
• M (< 2 sec) - to step back through the sequence.
• M (2 sec, any time) - to revert to Watch Main Time.
• No button action (for 2 min) - revert to Watch Main Time.
• L - to activate the Backlight.
WATCH MAIN TIME, information includes (Fig. 4A or 4B):
> Day of the Week graphic (MON, TUE, etc.); or Dual Time (hr:min) with icon; whichever one is selected.
> Main Time (hr:min_sec) with AM (or PM) icon.
> Battery icon, during a Low Battery condition.
> Date as Month.Day (or Day.Month).
> Alarm (speaker) icon, if the Daily Alarm is set On.
• A (< 2 sec) - to access the ALT screen and step forward through the sequence described above.
• A (2 sec) - to access Log and History.
• M (2 sec) - to access FREE Surface Mode.
• M (< 2 sec) - to access the Chronograph and step back through the sequence.
• S (2 sec) - to interchange Day of the Week with Dual Time (if set On), selecting which one is to be displayed.
• S (< 2 sec) - to silence the Daily Alarm.
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
WATCH ALT (Alternate), information includes (Fig. 5A or 5B):
> Dual Time (hr:min) or OFF with icon; or Day of the Week graphic (MON, TUE, etc.); whichever one is not on the Main.
> Temperature with °F (or °C).
• A (< 2 sec) - to step forward to CDT.
• M (< 2 sec) - to step back to Watch Main Time.
• Reverts to Main in 10 seconds if A or M is not pressed.
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
WATCH CDT (Countdown Timer)
This selection provides access to a CDT for use in Watch mode.
Once set and started, it will continue to run in the background while on the surface in Watch Mode until it is turned Off or the time
counts down to 0:00 at which time the alarm will strike and it will revert to Off.
Upon accessing FREE mode or starting a dive, Watch CDT operation will be terminated and the time reset to the previous setting.
CDT Lead-in, information includes (Fig. 6):
> Graphics Go To and Cdt with icon.
• S (< 2 sec) - to access CDT Status.
• A (< 2 sec) - to step forward to Daily Alarm Lead-in.
• M (< 2 sec) - to step back to Watch ALT.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Main Time.
CDT Status, information includes (Fig. 7A/B):
> Countdown Time (hr:min) as >>
0:00 if no time has been set, or it completed the countdown;
hr:min set if Off and ready to start;
hr:min remaining of On with a countdown in progress.
> Graphic Cdt.
> Graphic OFF (or ON) flashing (Fig. 7A).
© 2002 Design, 2013 9
F11 OPERATING MANUAL
Fig. 4A - MAIN TIME
(Day of Week selected)
Fig. 4B - MAIN TIME
(Dual Time selected)
Fig. 5A - WATCH ALT
(Day of Week on Main)
Fig. 5B - WATCH ALT
(Dual Time on Main)
Fig. 6 - CDT LEAD-IN
or ON
Fig. 7A - CDT STATUS
(upon access)
Doc. No. 12-7285-r01 (5/3/13)