Aeris Elite T3 Operating Manual page 110

110
 Pressing and rel e asing the M button momentaril y (< 2
seconds) whil e the TMT 2- 3 USE (Lead- i n) screen is
displ a yed (with the setting BUD) wil l start a Search for BUD
1 (TMT 2)) displ a ying the graphics BUD and SEArCH (Fig.
94) for a maximum of 5 seconds.
NOTE: No further button action is required. The
displays will change automatically, then revert
to the NORM DIVE MAIN Display
 After 5 seconds, or l e ss if BUD 1's (TMT 2's) signal is
acquired, the BUD 1 screen wil l appear displ a ying the
graphic BUD1 and BUD 1's Pressure (Fig. 95), or the
graphic NotAvAil (Not Avail a bl e ), for 3 seconds.
 After BUD 1's screen has been displ a yed for 3 seconds, the
BUD 2 screen wil l appear displ a ying the graphic BUD2
and BUD 2's Pressure, or the graphic NotAvAil for 3
seconds.
 After BUD 2's screen has been displ a yed for 3 seconds, the
screen wil l revert to the NORM DIVE MAIN Displ a y.