Norm Dive No Deco Safety Stop - Aeris Epic Operating Manual

NORM DIVE NO DECO SAFETY STOP

Upon ascending to the Safety Stop Depth set on any No Decompression dive in which
Depth exceeded 30 FT (9 M), a short beep will be emitted and a Safety Stop at the Depth
set will appear on the display with a countdown timer that begins at the Safety Stop Time
set and counts down to 0:00 (min:sec).
The Safety Stop will be displayed until the countdown times out, or you descend below 30
FT (10 M), or you surface. There is no Penalty if you surface prior to completing the
Safety Stop.
If the Safety Stop was set to OFF, the screen will not appear during the ascent.
NORM DIVE NO DECO SAFETY STOP MAIN DISPLAY,
Information includes (Fig. 91) -
> Graphics SAF , STOP, and xxF or xxM (value of the Stop
Depth set) scrolling at the top
> Nitrogen Bar Graph representing Nitrogen loading
> TMT Link icon and Tank Pressure with the PSI (or BAR) icon,
if a TMT is active and linked
> Symbols STOP and TIM and the Stop Time (min:sec) set
> Dive Time Remaining (hr:min) with symbols TIM and NDC
(or O2 or AIR)
> Tank icon representing the GAS selected (1, 2, or 3)
> Symbol NITROX (if set for Nitrox)
> Current Depth with symbol FT (or M)
106