Aeris Elite T3 Operating Manual page 142

BATTERY REPLACEMENT
NOTE: The procedures that follow must be closely adhered to. Dam-
age due to improper Battery replacement is not covered by the Elite
T3's year warranty.
When replacing the Battery in the Elite T3, it is recommended that
you also replace the Battery(s) in the Transmitter(s), and vice-versa.
The Battery Compartment(s) shoul d onl y be opened in a dry and cl e an environment with
extreme care taken to prevent the entrance of moisture or dust.
As an additional precautionary measure to prevent formation of moisture in the Battery
Compartment(s), it is recommended that the Battery(s) be changed in an environment
equival e nt to the l o cal outdoor temperature and humidity (e.g., do not change the
Battery(s) in an air conditioned environment then take it outside during a hot sunny day).
Inspect the Buttons, Lens, and Housing(s) to ensure they are not cracked or damaged. If
there is any sign of moisture in the El i te T3 or Transmitter(s), DO NOT attempt to use the
El i te T3 for diving (NORM, GAUG, or FREE) until it receives proper service by the AERIS
factory.
Hot Swap
If the new Battery can be inserted into the El i te T3 within 8 seconds after the ol d one is
removed (referred to as a Hot Swap), settings and nitrogen and oxygen cal c ul a tions for
repetitive dives wil l be retained.
14